Contents Per Pack:
1x Original Tyre Inserts
1x 44mm, 55mm Rimpact Insert Compatible Valves or a set of Peaty’s Valves (currently only available as a pair)
2x Die Cut Vinyl Rim Decals
Specs:
55mm Wide
25mm – 35mm Rims
2.4”-2.6” Tyres
110g in 29” and 105g in 27.5”
TheOriginal V2is a cumulative performance upgrade to the fan favourite Original Insert.
Cut out trail chatter, support your sidewalls, run less pressure, and protect your rimswith the Rimpact Original V2 Tyre Insert. This insert is ourlightweight trail, all mountain and light enduro insert. Great for shorter travel bikes, smoother riders or weight conscious pinners.Your mountain biking experience shouldn't be limited by punctures. That's why we've created the Rimpact Original V2 tyre insert –the weight conscious solution for protection and performance on the trail.
This insert isa cinch to install, and the weight is almost totally unnoticeable in the tyre making it a no brainer when it comes to ensuring your rides aren’t cut short by unwanted flat tyres.
Use about 25% more sealant than recommended on the bottle to ensure the extra surface area of the insert is coated with plenty of fluid to spare. Our inserts are closed cell and cannot absorb liquid however some sealant will cling to the outside of the insert requiring a slightly higher dosage. It can be injected through Rimpact Valves or poured directly into the tyre.
Please follow installation instructions prior to fitting/removing, there is a QR code on the box that links you to the Installation page on our website.
Disclaimer: It is not advised to run air pressures outside that of the tyre manufacturers recommendations. Failure to do so may result in injury or the premature failure of the bicycle. Rimpact does not accept any responsibility for misuse of the Rimpact insert or improper installation. Rimpact Inserts are designed to work WITH Rimpact Insert Compatible Valves.
Not included: Tyres, Wheelset.